Cuisinart Appliance Error Codes

Complete diagnostic guide for Cuisinart small household appliances including coffee makers, food processors, bread makers, air fryers, and toaster ovens in the United States.

Important Note

Cuisinart appliances (part of Conair Corporation) use various error codes that may vary by model and product type. Coffee makers use codes like EEO, ERL, E08, while bread makers use E00, E01, HHH/EEE.

Always refer to your specific model's user manual for model-specific error codes and troubleshooting procedures. Regular maintenance including descaling coffee makers and cleaning sensors can prevent many common errors.

Coffee Maker Errors

Error codes for Cuisinart coffee makers including Grind & Brew models related to water supply, grinding system, and brewing problems.

Error Code / Indicator	Meaning	Possible Causes	Solutions
EEO	Air bubble in line or leak in hose / Water supply problem	Air bubble in water line Leak in water supply hose Water reservoir not properly sealed Water tank empty or not properly inserted	Ensure water reservoir is properly inserted Fill water tank Check for leaks in hoses Remove air bubbles by running rinse cycle Check water reservoir seal
ERL	Grinder sensor problem / Hopper system blockage	Grinder sensor problems Hopper system blocked Mineral buildup or oil residue Clogged filters affecting water flow Contamination in sensor lines	Thoroughly clean and descale Check grinder sensor connections Clean hopper system Inspect filters and replace if needed Clean sensor lines
E08	Grinder problem / Coffee bean container issue	Grinder blocked Coffee bean container not properly seated Mechanical blockage Container loose or misaligned	Remove and clean grinder Remove coffee bean container and reinsert correctly Check for loose parts Ensure container clicks into place Clean grinder mechanism
Not Ready	Appliance not ready / Reset needed	Reset needed Routine interrupted System error Control panel locked	Perform reset by pressing specific buttons simultaneously (e.g., "rinse" + "Hot Water") Unplug and wait 30 seconds, then plug back in Turn off and restart Check user manual for model-specific reset procedure

Bread Maker Errors

Error codes for Cuisinart bread makers and convection bread machines related to temperature and system problems.

Error Code / Indicator	Meaning	Possible Causes	Solutions
E00	Ambient temperature too low / Below -20°C (-4°F)	Room temperature too low Appliance stored in cold environment Temperature below -20°C (-4°F) Too cold for proper bread rising	Move appliance to warmer room Ensure room temperature is suitable Wait for room to warm up Do not use in temperatures below -20°C
E01	Appliance too hot / Overheating from previous use	Appliance too hot from previous baking Multiple breads baked consecutively Overheating prevents kneading or baking cycle Insufficient cooling time	Allow appliance to cool for at least 10 minutes Wait before starting new cycle Ensure proper ventilation Do not bake multiple breads consecutively without cooling
HHH / EEE	Serious internal error / Continuous beeping	Serious internal error Electronic malfunction Sensor failure Control board problem	Unplug appliance immediately Do not attempt to fix Contact Cuisinart customer service May require service or replacement Check warranty coverage

Toaster Oven and Air Fryer Errors

Error codes for Cuisinart toaster ovens and air fryer combinations related to overheating and sensor problems.

Error Code / Indicator	Meaning	Possible Causes	Solutions
ErL	Overheating or sensor problem / Dirt in sensors	Appliance overheating Dirt or contamination in sensors Temperature sensor error Insufficient ventilation	Allow appliance to cool down Clean sensors thoroughly Check ventilation openings Ensure proper air circulation Contact support if problem persists

Pressure Cooker Errors

Error codes for Cuisinart electric pressure cookers related to sensor and control board problems.

Error Code / Indicator	Meaning	Possible Causes	Solutions
-- (with continuous beeping)	Sensor or control board problem	Sensor malfunction Control board problem System error Display showing "--"	Turn off appliance Unplug and wait 30 seconds Check power supply Contact Cuisinart support May require service

General Troubleshooting Tips

General maintenance and troubleshooting tips to prevent common Cuisinart appliance errors.

Error Code / Indicator	Meaning	Possible Causes	Solutions
Appliance Not Starting	Power or control issue	Power cord not properly connected Control panel not responding Safety lock engaged Circuit breaker tripped	Check power cord connection Try different power outlet Check circuit breaker Unplug and restart after 30 seconds Ensure safety locks are disengaged
Poor Performance	Reduced functionality or performance	Insufficient cleaning Mineral buildup Worn components Improper usage	Clean appliance thoroughly Descale coffee makers regularly Check for worn parts Follow manufacturer usage instructions Regular maintenance prevents issues
Unusual Noises	Grinding, rattling, or loud sounds	Mechanical wear Loose components Motor problems Foreign objects	Inspect for loose parts Check motor operation Remove any foreign objects Contact support if noise persists

Need More Help?

If you are experiencing problems with your Cuisinart appliance that are not covered by these error codes, or if the provided solutions do not resolve your issue, we recommend:

Consult your Cuisinart appliance user manual for model-specific information
Visit the official Cuisinart support page: cuisinart.com/support
Contact Cuisinart customer service (Conair Corporation) in the United States with your model number
Regular maintenance: descale coffee makers regularly, clean bread maker pans, maintain food processors
For bread makers, allow proper cooling time between baking cycles
For coffee makers, regularly clean grinder and hopper system
Seek help from a qualified appliance repair technician
Check warranty coverage if your appliance is still under warranty

Go to Diagnostics Page Back to Brand Overview